3/8" Drive 6-Point Impact Socket, SAE, Metric, European Standard

  • DIN
  • 3/8 in.
  • 6P socket
  • Tien-i Impact Socket Made in Taiwan, from forged and heat treated CHROME MOLYBDENUM STEEL (CR-MO) with a corrosion-resistant black phosphate finish (MANGANIC PHOSPHATE FINISH)
  • Tien-i Impact Socket with High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off
  • Complete Sizes for SAE and Metric system
  • High-contrast permanent laser etched size markings are easy-to-read, even in low light
  • Tien-i Impact Socket meets or exceeds ANSI & DIN & ISO performance standards 
    To know more: Differences between DIN and ANSI Specifications for Impact Sockets 
Spec Size Chart

3/8"DR. 6-POINT DEEP IMPACT SOCKET (mm), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EILMO36207 7 64 19 11.6 75
EILMO36208 8 64 19 12.7 77
EILMO36209 9 64 19 14.0 80
EILMO36210 10 64 19 15.2 75
EILMO36211 11 64 19 17.0 80
EILMO36212 12 64 19 18.0 79
EILMO36213 13 64 19 20.0 88
EILMO36214 14 64 19 21.0 94
EILMO36215 15 64 19 22.0 102

3/8"DR. 6-POINT IMPACT SOCKET (mm), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EIMO36215 15 29.5 19 22 43
EIMO36216 16 30 22 23.5 58
EIMO36217 17 30 22 24 57
EIMO36218 18 30 22 25 57
EIMO36219 19 30 22 26 56
EIMO36220 20 30 22 28 80
EIMO36221 21 30 22 28 80
EIMO36222 22 30 22 30 95
EIMO36224 24 30 22 32 110

3/8"DR. 6-POINT IMPACT SOCKET (mm), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EIMO36207 7 29.5 19 11.4 30
EIMO36208 8 29.5 19 12.7 31
EIMO36209 9 29.5 19 14.0 33
EIMO36210 10 29.5 19 15.2 33
EIMO36211 11 29.5 19 17.0 33
EIMO36212 12 29.5 19 18.0 35
EIMO36213 13 29.5 19 20.0 39
EIMO36214 14 29.5 19 21.0 46

3/8"DR. 6-POINT DEEP IMPACT SOCKET (mm), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EILMO36216 16 64 22 23 108
EILMO36217 17 64 22 24 120
EILMO36218 18 64 22 25 120
EILMO36219 19 64 22 26 124
EILMO36220 20 64 22 28 140
EILMO36221 21 64 22 28 140
EILMO36222 22 64 22 30 160
EILMO36224 24 64 22 32 160

3/8"DR. 6-POINT IMPACT SOCKET (inch), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EIMO36108 1/4" 29.5 19 10.6
EIMO36110 5/16" 29.5 19 12.6
EIMO36112 3/8" 29.5 19 14.6
EIMO36114 7/16" 29.5 19 17.1
EIMO36120 5/8" 30.0 22 23.5
EIMO36122 11/16" 30.0 22 24.0
EIMO36124 3/4" 30.0 22 26.0
EIMO36126 13/16" 30.0 22 28.0
EIMO36128 7/8" 30.0 22 30.0
EIMO36130 15/16" 30.0 22 32.0
EIMO36132 1" 30.0 22 34.0

3/8"DR. 6-POINT DEEP IMPACT SOCKET (inch), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EILMO36110 5/16" 64 19 12.6
EILMO36112 3/8" 64 19 14.6
EILMO36114 7/16" 64 19 17.1
EILMO36120 5/8" 64 22 23.0
EILMO36122 11/16" 64 22 24.0
EILMO36124 3/4" 64 22 26.0
EILMO36126 13/16" 64 22 28.0
EILMO36128 7/8" 64 22 30.0
EILMO36130 15/16" 64 22 32.0
EILMO36132 1" 64 22 34.0
Product Detail
High Torque Strength

High Torque Strength

Meets at least 1.2 times the ANSI test torque standard. Verified by a single cycle test in which torque is applied up to a specified value without failure or permanent deformation.

Standard

Standard

Each member of our quality control team has undergone SGS training to ensure that every Tlen-I product satisfies DIN, ISO and ANSI/ASTM international standards. Seeing is believing. We would like to invite you to visit our factory and meet our quality control team.

Laser & Stamped Marking
Laser & Stamped Marking

Marked with the size in 2 way - visible laser mark and permanent stamp mark.

Fully Stepped Shoulders
Fully Stepped Shoulders

Fully stepped shoulders allows better access to tight cavities.

Full-Length Socket Well
Full-Length Socket Well

The inner shaft extends well into the base for better fastener engagement.

Material Quality
Material Quality

Tien-I is a member of China Steel Corporation (CSC), the leading steel company in Taiwan.