1/4" Drive 6-Point Impact Socket, SAE, Metric, European Standard

  • DIN
  • 1/4 inch
  • 6P socket
  • Tien-i Impact Socket Made in Taiwan, from forged and heat treated CHROME MOLYBDENUM STEEL (CR-MO) with a corrosion-resistant black phosphate finish (MANGANIC PHOSPHATE FINISH)
  • Tien-i Impact Socket with High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off
  • Complete Sizes for SAE and Metric system
  • High-contrast permanent laser etched size markings are easy-to-read, even in low light
  • Tien-i Impact Socket meets or exceeds ANSI & DIN & ISO performance standards 
    To know more: Differences between DIN and ANSI Specifications for Impact Sockets 
Spec Size Chart

1/4"DR. 6-POINT IMPACT SOCKET (inch), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EIMO26106 3/16" 23 8.4 13
EIMO26107 7/32" 23 9.4 13
EIMO26108 1/4" 23 10.3 13
EIMO26109 9/32" 23 11.3 13
EIMO26110 5/16" 23 12.3 13
EIMO26111 11/32" 23 13.8 13
EIMO26112 3/8" 23 15 13
EIMO26114 7/16" 23 16.3 13
EIMO26116 1/2" 23 18.8 13
EIMO26118 9/16" 23 20 13

1/4"DR. 6-POINT DEEP IMPACT SOCKET (inch), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EILMO26106 3/16" 50 8.4 13
EILMO26107 7/32" 50 9.4 13
EILMO26108 1/4" 50 10.3 13
EILMO26109 9/32" 50 11.3 13
EILMO26110 5/16" 50 12.3 13
EILMO26111 11/32" 50 13.8 13
EILMO26112 3/8" 50 15 13
EILMO26114 7/16" 50 16.3 13
EILMO26116 1/2" 50 18.8 13
EILMO26118 9/16" 50 20 13

1/4"DR. 6-POINT DEEP IMPACT SOCKET (mm), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EILMO26205 5 50 8.7 13
EILMO262055 5.5 50 9.3 13
EILMO26206 6 50 9.9 13
EILMO26207 7 50 11.1 13
EILMO26208 8 50 12.3 13
EILMO26209 9 50 13.8 13
EILMO26210 10 50 15 13
EILMO26211 11 50 16.3 13
EILMO26212 12 50 17 13
EILMO26213 13 50 18.8 13
EILMO26214 14 50 20 13

1/4"DR. 6-POINT IMPACT SOCKET (mm), DIN/ ISO

Item No. S L(mm) D1(mm) D2(mm) (g)
EIMO26204 4 23 7.5 13
EIMO262045 4.5 23 8.1 13
EIMO26205 5 23 8.7 13
EIMO262055 5.5 23 9.3 13
EIMO26206 6 23 9.9 13
EIMO26207 7 23 11.1 13
EIMO26208 8 23 12.3 13
EIMO26209 9 23 13.8 13
EIMO26210 10 23 15 13
EIMO26211 11 23 16.3 13
EIMO26212 12 23 17 13
EIMO26213 13 23 18.8 13
EIMO26214 14 23 20 13
Product Detail
High Torque Strength

High Torque Strength

Meets at least 1.2 times the ANSI test torque standard. Verified by a single cycle test in which torque is applied up to a specified value without failure or permanent deformation.

Standard

Standard

Each member of our quality control team has undergone SGS training to ensure that every Tlen-I product satisfies DIN, ISO and ANSI/ASTM international standards. Seeing is believing. We would like to invite you to visit our factory and meet our quality control team.

Laser & Stamped Marking
Laser & Stamped Marking

Marked with the size in 2 way - visible laser mark and permanent stamp mark.

Fully Stepped Shoulders
Fully Stepped Shoulders

Fully stepped shoulders allows better access to tight cavities.

Full-Length Socket Well
Full-Length Socket Well

The inner shaft extends well into the base for better fastener engagement.

Material Quality
Material Quality

Tien-I is a member of China Steel Corporation (CSC), the leading steel company in Taiwan.